Tuner features
English
1Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected.
2Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
3• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies.
•Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).
NOTE
If the frequencies stored at the preset numbers receive stations which were not originally memorized when travelling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1.
•Manual Tuning
Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.
NOTE
•The ST indicator lights up when stereo broadcasts are being received.
•Please see the menu settings about selecting tuning mode. (page 22)
1Select the band/station that you want to have stored.
2Hold down the button
The button number blinks once in the display to indicate that the data has been stored.
Recalling a Preset Station:Press the preset station button
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands.
Clock displayChanging the Clock display:Each time you press the CLK button, the display switches between the Programme Service name (during RDS station reception)/Station frequency and clock.
Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.
— 12 —