Kenwood KDC-4060RG, KDC-4060RA Installation, Connecting the ISO Connector see p.23, English

— 24 —

2WARNING

English

Connecting Cables to Terminals

Connecting the ISO Connector (see p.23)

The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.

The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.

1(Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply.

Installation

■Installation

Firewall or metal support

Accessory3

Unit	Vehicle
Ignition cable (Red)	A–7 Pin (Red)
Battery cable (Yellow)	A–4 Pin (Yellow)

2The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

Unit	Vehicle
Ignition cable (Red)	A–7 Pin (Red)

Self-tapping	Metal mounting
screw	strap
(commercially	(commercially
available)	available)

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

Battery cable (Yellow) A–4 Pin (Yellow)

3The A-4 pin (yellow) of the vehicle's ISO connector is not connected to anything, while the A-7 pin (red) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).

Unit	Vehicle
Ignition cable (Red)	A–7 Pin (Red)
Battery cable (Yellow)	A–4 Pin (Yellow)

NOTE

When the connection is made as in 3 above, the unit's power will not be linked to the ignition key. For that reason, always make sure to turn off the unit's power when the ignition is turned off.

To link the unit's power to the ignition, connect the ignition cable (ACC...red) to a power source that can be turned on and off with the ignition key.

NOTE

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).