RDS features (See page 7)
English
News Bulletin Function
with PTY News Timeout Setting
You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes on each journey.
Turning News Bulletin Function On/Off:
1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
2Press the ¢ button repeatedly until the News Bulletin function appears in the display.
Press the 4 button to search in the other direction. The function setting is indicated by "NEWS 00M" or
"NEWS OFF" in the display, indicating that the function is on or off, respectively.
NOTE
Depending on the interval chosen, the "00M" in the display will change when the function is turned on.
3Changing the Function Setting Press either the FM or AM button.
Each time you press the FM or AM button until the desired setting is displayed.
Press the FM button to increase the interval, and the AM button to decrease it.
OFF ↔ 00M ↔ 10M ↔ 20M ↔ 30M ↔ 40M ↔ 50M ↔ 60M
↔ 70M ↔ 80M ↔ 90M(M= minutes) When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, the NEWS indicator will blink and reception will begin at the preset volume.
NOTE
If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. Setting the interval at the "00M" factory default indicates no News Timeout will be made, meaning that additional news bulletins will continue to be searched for.
4Press the MENU button to end the menu mode.
NOTE
•This function is only available if the desired station sends PTY- code for news bulletin or belongs to
•If you turn on the news bulletin function in the MW/LW band, the band is switched automatically to the FM band. However, the MW/LW band is not returned to when you turn off the function.
