Function of the KDC-MPV7023/KDC-6023/KDC-5023
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM band 9 kHz.
While pressing the [1] and [5] button, press the Reset button.
The frequency step changes to FM band 200 kHz, and AM band
10 kHz.
•When the same operation is repeated, it returns to the original
setting.
•When the frequency step is switched, the frequencies in the
memory are deleted.
Frequency Step Setting
Calling up the stations in the memory.
1Select the band
Press the [FM] or [AM] button.
2Call up the station
Press the desired [1] —[6] button.
Preset Tuning
KDC-5023R:
•When the <AF (Alternative Frequency)> (page 29) is ON, only RDS
stations are put in the memory.
•When Auto Memory Entry is done in the FM2 band, the RDS
stations preset in the FM1 band aren't put in the memory.
Likewise, when it is done in the FM3 band, RDS stations preset in
FM1 or FM2 aren't put in the memory.
Function of the KDC-MPV7023/KDC-6023/KDC-5023R
Putting a station with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "Auto-Memory"/ "A-MEMORY" display.
4Open Auto Memory Entry
Press the [4] or [¢] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
Function of the KDC-5023
Putting stations with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
— 15 —
KDC-MPV7023_U.S r2 02.10.31 10:16 AM Page 15