switch as shown below.
4Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item Display Range
Bass level "Bass"/ "BAS" –8 — +8
Middle level "Middle"/ "MID" –8 — +8
Treble level "Treble"/ "TRE" –8 — +8
Balance "Balance"/ "BAL" Left 15 — Right 15
Fader "Fader"/ "FAD" Rear 15 — Front 15
Non-Fading level* "NF Level" –15 — +15
Front/Rear High Pass "HPF" Through/100/125/170
Filter* Hz
Non-Fading "LPF NF" 50/80/120/Through Hz
Low Pass Filter*
Volume offset "V-Offset"/ "V-OFF" –8 — ±0
Loudness "LOUD" ON/OFF
•Volume offset: Each source's volume can be set as a difference
from the basic volume.
Loudness: Compensating for low and high tones during low
volume.
•* Function of the KDC-MPV7023/6023
5Exit Audio Control mode
Press the [AUD] button.
1Select the source for adjustment
Press the [SRC] button.
2Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted

Audio Control

You can recall the best sound setting preset for different types of
music.
1Select the source to set
Press the [SRC] button.
2Select the Sound type
Press the [System Q] button.
Each time the button is pressed the sound setting switches.
Sound setting Display
Flat "Flat"/ "FLAT"
User memory "User"/ "USER"
Rock "Rock"/ "ROCK"
Pops "Pops"/ "POPS"
Easy "Easy"/ "EASY"
Top 40 "Top40"/ "TOP40"
Jazz "Jazz"/ "JAZZ"
User memory: The values set on the <Audio control> (page 9).
Each setting value is changed with the <Speaker setting> (page
10).
First, select the speaker type with the Speaker setting.

System Q

— 9 —
KDC-MPV7023_U.S r2 02.10.31 10:16 AM Page 9