If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below.
1 Refer to the function "Theft deterrent faceplate" (page 10) and remove the faceplate.
2 Insert the provided screw into the hole at the centre of the bottom side of the faceplate which you have removed from the unit.
Accessory4
3 Push back the bottom of the faceplate bracket unit it locks.
4 Refer to the section "Theft deterrent faceplate (page 10)" and then .reattaching the faceplate.
2CAUTION
Never insert the taptite screws (ø2 ⋅ 6 mm) in any other screw holes than the one specified. If you insert it in another hole, it will contract and may cause damage to the mechanical parts inside the unit.
Locking the faceplate to the unit■Locking the faceplate to the unit
— 37 —