NOTE

•This mode is available only when the Sound coordinate system is on. (page29)

•You can call the following settings with this function; bass centre frequency, bass level, bass quality factor, bass extension, treble centre frequency, and treble level setting. Their setting values are different depending on the setting of the mobile preset plan mode.

"Bass"/"BAS" : Adjust the bass level. Setting values: - 8 – + 8"Treble"/"TRE" : Adjust the treble level. Setting values: - 8 – + 8"Balance"/"BAL" : Adjust the balance level. Setting values: Left 15 – Right 15"Fader"/"FAD" : Adjust the fader level.

Setting values: Front 15 – Rear 15

"V OFFSET/VOS" : Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level.

Setting values: - 8 – ± 0

Mobile Preset

This function allows you to adjust the setting that is recalled with the sound coordinate system, according to types of speakers.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Press the AUD button to enter the mobile preset plan mode.

3Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.

Off / For the OEM speaker / For 6/6x9 in. speaker / For 5/4 in. speaker

4Press the AUD button to end the mobile preset plan mode.

NOTE

•When you change the setting of type of speaker, the bass and treble tone settings are returned to original levels.

•This mode is available only when the Sound coordinate system is on. (page29)

TEL Mute

Shut down the audio system temporarily whenever an incoming call is received.

NOTE

The function will not work if a cable is not connected to the car phone.

When the telephone rings:

When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted.

Restoring Original Unit Source During Phone Call: Press the SRC button.

"CALL" disappears from the display, and the volume of the original source is restored gradually.

Turning TEL Mute Function Off After Phone Call: Hang the phone up.

"CALL" disappears from the display.

The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually.

— 9 —