Troubleshooting Guide
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
The TEL mute function does | The TEL mute cable is not connected properly. | Connect the cable correctly, referring to the section on |
not work. |
| "Connecting Cables to Terminals". |
|
|
|
The TEL mute function turns | The TEL mute cable is touching a metal part of the car. | Pull the TEL mute cable away from the metal part of the |
on even though the TEL mute |
| car. |
cable is not connected. |
|
|
|
|
|
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
The disc control mode cannot | No cable has been connected to the disc changer input | Connect the cable to the disc changer input terminal on | |
be selected. | terminal on the unit. | the unit. | |
|
|
| |
The specified disc does not | The specified CD is very dirty. | Clean the CD. | |
play, but another one plays |
|
| |
The CD is | Load the CD with the labelled side up. | ||
instead. | |||
|
|
| |
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the | |
|
| specified disc. | |
|
|
| |
| The disc is severely scratched. | Try another disc instead. | |
|
|
| |
The sound skips. | Something is touching the disc changer. | Remove whatever is touching it. | |
|
|
| |
| The CD is scratched or dirty. | If skipping happens at the same place when the car is | |
|
| stopped, something is wrong with the CD. Clean the CD. | |
|
|
| |
The display shows that the | The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see page 4). | |
changer is being played, but no |
|
| |
sound can be heard. |
|
|
The specified track does not play.
Random play or magazine random play has been selected.
Turn off the random play or magazine random play function.
Track repeat, disc repeat, track scan, disc scan, random play, and magazine random play start by themselves.
The setting is not cancelled.
The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed.
•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
•Even though no device
— 39 —