Other features
English
Adjust various parameters of sound quality.
1Press the AUD button to enter the control mode.
2Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will change as follows:
Pressing the FM button advances the display, and pressing the AM button reverses it.
BassFader
TrebleBalance
NOTE Source tone memory
Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.).
3Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment | Operation of Audio control button | |
mode |
|
|
(Display) | 4 button | ¢ button |
Bass ("BAS") | Bass decreased. | Bass increased. |
|
|
|
Treble("TRE") | Treble decreased. | Treble increased. |
|
|
|
Balance("BAL") | Left channel emphasized. | Right channel emphasized. |
|
|
|
Fader ("FAD") | Rear channel increased. | Front channel increased. |
|
|
|
4Press the AUD button to end the control mode.
Function of the
This function permits switching the clock display on/off when switching the display during each of the modes.
Turning the Clock Display On/Off:1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
2Press the ¢ button repeatedly until the Switching Clock Display function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "CLK ON" or "CLK OFF" in the display, indicating that the Clock Display function is on or off, respectively.
3Switching settings
Press either the AM button or FM button . The display and setting will change.
4Press the MENU button to end the menu mode.
Function of the
This function permits the graphic display to be switched to one that is linked with the volume level value or to display various modes. The initial setting is ON (displaying various modes).
Turning the Graphic Display On/Off:1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
2Press the ¢ button repeatedly until the Switching Graphic Display function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "GRAP ON" or "GRAP OFF" in the display, indicating that the Graphic display is on or off, respectively.
"GRAP ON" (The graphic display works.)
"GRAP OFF" (The graphic display does not work.)
— 26 —