English

Troubleshooting Guide

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

A CD ejects as soon as it is

The CD is upside-down.

Load the CD with the labelled side up.

loaded.

 

 

The CD is quite dirty.

Clean the CD, referring to the section on "Cleaning CDs" (see

 

 

 

page 5).

 

 

 

The sound skips on a CD.

The CD is scratched or dirty.

Clean the CD, referring to the section on "Cleaning CDs" (see

 

 

page 5).

 

 

 

The specified track does not

Random play has been selected.

Turn off the random play function.

play.

 

 

 

 

 

External disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The disc control mode cannot

No cable has been connected to the disc changer input

Connect the cable to the disc changer input terminal on the

be selected.

terminal on the unit.

unit.

 

 

 

The specified disc does not

The specified CD is very dirty.

Clean the CD.

play, but another one plays

 

 

The CD is upside-down.

Load the CD with the labelled side up.

instead.

 

 

 

 

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the

 

 

specified disc.

 

 

 

 

The disc is severely scratched.

Try another disc instead.

 

 

 

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

 

 

 

 

The CD is scratched or dirty.

If skipping happens at the same place when the car is

 

 

stopped, something is wrong with the CD. Clean the CD.

 

 

 

The display shows that the

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see page 4).

changer is being played, but no

 

 

sound can be heard.

 

 

 

 

 

The specified track does not

Random play or magazine random play has been selected.

Turn off the random play or magazine random play function.

play.

 

 

If the following situations, consult your nearest service centre:

•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.

•Even though no device (KCA-S210A, CA-C1AX, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when switching modes.

— 36 —