Other features

English

Selectable Illumination

You can switch the colour of the button illumination between green and amber.

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Selectable Illumination function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "COL GRN" or "COL AMB" in the display, indicating that the current colour is green or amber, respectively.

3Switching settings

Press either the AM button or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

Touch Sensor Tone

This function produces a beep sound that accompanies button operation. It can be switched on or off.

Turning the Beep On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Touch Sensor Tone function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "Beep ON" or "Beep OFF" in the display, indicating that the current beep setting is on or off, respectively.

3Switching settings

Press either the AM or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

NOTE

The beep sound is not output from the preout jacks.

Function of the KDC-6070R

Contrast Adjustment

This adjustment permits easy viewing of the display.

To adjust the contrast:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Contrast Adjustment function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "CONT ##" in the display, indicating that the Contrast Adjustment mode is on.

3Switching settings

Press either the AM or FM button.

Press the FM button to change the setting values higher, and press the AM button to change them lower. Settings may be made from 0 to 10.

4Press the MENU button to end the menu mode.

NOTE

The "##" display in the contrast adjustment mode will differ depending on the setting. The initial setting value is "5".

Adjusting Time

With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment.

— 28 —