Operation of
1Enter dialing method mode
Press the [ATT] button for at least 1 second.
2Select the call log mode Press the Control knob.Select the
Turn the Control knob or push it towards up or down.
4Make a callPress the Control knob for at least 1 second.
⁄
•The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the
1Enter the phone number you wish to register Enter the phone number with reference to the following:
Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book
2Enter Preset Memory mode Press the [FNC] button.3Select the number to put in the memory Turn the Control knob or push it towards left or right.
4Determine the number to put in the memory Press the Control knob for at least 1 second.
Exit the Preset Memory modePress the [FNC] button.
1Enter voice recognize mode Select “BT” >
For how to select Function Control item, refer to <Function Control> (page 6).
“Ready” is displayed.
2Press the Control knob. “PB Name?” is displayed.
When a beep is heard, utter the name within 2 seconds.
3“PN Type?” is displayed.When a beep is heard, utter the category within 2 seconds.
4Make a call
Press the Control knob for at least 1 second.
•This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category.
⁄
•If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 40)
•Both the name and category requires registration of a voice tag. (page 26)
•Audio sound is not output during voice recognize.
The category items in the Phone Book are displayed as follows:
Display |
| Information |
"General"/ |
| General |
"Home"/ |
| Home |
"Office"/ |
| Office |
"Mobile"/ |
| Mobile |
"Other"/ |
| Other |
16