Audio Adjustments
Audio ControlYou can adjust following Audio Control items ;
Adjustment Item |
| Display |
| Range |
Rear volume |
| “REAR VOLUME” |
| 0 — 35 |
Subwoofer level |
|
| ||
System Q |
| “USER”/“ROCK”/ |
| User setting/Rock/Pops/Easy/ |
|
| “POPS”/“EASY”/ |
| Top 40/Jazz/Natural |
|
| “TOP40”/“JAZZ”/ |
|
|
|
| “NATURAL” |
|
|
Bass level* |
| “BASS LEVEL” |
| |
Middle level* |
| “MIDDLE LEVEL” |
| |
Treble level* |
| “TREBLE LEVEL” |
| |
Balance |
| “BALANCE” |
| Left 15 — Right 15 |
Fader |
| “FADER” |
| Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
*Source tone memory: Puts the set up value in the memory per source.
⁄
•“USER”: The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
1Select the source to adjustFor how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).
2Enter Audio Control mode Press the [AUD] knob.3Select the Audio item to adjust Press the [AUD] knob.4Adjust the Audio item Turn the [AUD] knob.5Exit Audio Control mode Press any button.Press a button other than the [AUD] knob or [0] and [ATT] button.
You can set Sound system , such as follows;
Adjustment Item |
| Display |
| Range |
Front High Pass Filter |
|
| Through/80/100/120/150 | |
|
|
|
| /180 Hz |
Rear High Pass Filter |
|
| Through/80/100/120/150 | |
|
|
|
| /180 Hz |
Low Pass Filter |
| “LPF” |
| 60/80/120/Through Hz |
Subwoofer Phase |
| “SW PHASE” |
| Reverse (180°)/ Normal (0°) |
Volume offset |
|
| ||
Loudness |
| “LOUD” |
| OFF/ON |
Dual Zone System |
| “2 ZONE” |
| OFF/ON |
⁄
•Volume offset: Sets each source’s volume as a difference from the basic volume.
•Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)
•Dual Zone System
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
-Set up the channel of sub source by “Zone2” of <Function Control> (page 6).
-Select Main source by [SRC] button.
-Adjust the volume of Front channel by [AUD] knob.
-Adjust the volume of Rear channel by <Audio Control> (page 20) or [5]/[∞] button on the remote control
(page 30).
-The Audio Control has no effect on sub source.
1Select the source to adjust
For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).
2Enter Audio Setup modePress the [AUD] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [AUD] knob.4Adjust the Audio setup item Turn the [AUD] knob.5Exit Audio Setup modePress the [AUD] knob for at least 1 second.
20