In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display

Setting

"BEEP ON"

Beep is heard.

"BEEP OFF"

Beep canceled.

In Standby mode

Manual Clock Adjustment

1Select Clock Adjustment modePush the Control knob towards up or down. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hours

Push the Control knob towards up or down.

Adjust the minutes

Push the Control knob towards right or left.

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"DISP ON"

Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

Set the Display Illumination Control when the <Demonstration mode Setting> (page 27) is set to OFF.

When the display is off, pressing any key will turn on the display.

When the display is off, you cannot perform any operation except for the following:

Volume

Attenuator

Selecting the source

Turning off the power

During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"DIM AUTO"

The display dims.

"DIM OFF"

The display doesn’t dim.

English 23