Menu system
Text Scroll
Setting the displayed text scroll.
Display | Setting |
"SCL AUTO" | Repeats scroll. |
"SCL MANU" | Scrolls when the display changes. |
⁄
•The text scrolled is listed below.
-CD text
-Folder name/ File name/ Music title/ Artist name/ Album name
-MD title
-Text for the Satellite radio source, HD Radio source, including Channel name, etc.
In Standby mode
Built-in Auxiliary input Setting
Set the
Display | Setting |
"AUX OFF" | When selecting the source there’s no Auxiliary Input. |
"AUX ON" | When selecting the source there’s Auxiliary Input. |
In Standby mode
CD Read Setting
When there is a problem with playing a CD with special format, this setting plays the CD by force.
Display | Setting |
"CD READ1" | Play CD and Audio file. |
"CD READ2" | Play CD by force. |
⁄
•Some music CDs may not play even in the "CD READ2" mode.
Other than Standby mode
Audio Preset Memory
Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.
1Setup Sound ControlRefer to the following operations to setup the Sound Control.
-<Audio Control> (page 8)
-<Audio Setup> (page 9)
2Enter Menu mode
Press the [MENU] button. "MENU" is displayed.
3Select Audio Preset modePush the Control knob towards up or down. Select thePress the Control knob for at least 1 second.
5Select the Audio Preset MemoryPush the Control knob towards up or down. Select the "MEMORY" display.6Put the Audio Preset in the memoryPress the Control knob for at least 2 seconds. The "MEMORY" display blinks 1 time.
7Exit Audio Preset mode Press the [MENU] button.
⁄
•Register 1 pair of Audio Preset Memory. You cannot register by the source.
•When you press the Reset, all the sources will be the setting value which is registered.
•The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume
26 English