Kenwood KDC-MP535U Built-inAmp Setting, Dual Zone System Setting, Supreme Setting, AMP Control, CRSC (Clean Reception System Circuit)

Menu system

In Standby mode

Built-in Amp Setting

Controlling the built-in amplifier.

Turning OFF this control enhances the preout quality.

Display	Setting
"AMP ON"	The built-in amplifier activates.
"AMP OFF"	The built-in amplifier deactivates.

Other than Standby mode/

When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel sound in the Dual Zone System.

Display	Setting
"ZONE2 R"	Sub source (Auxiliary input source) is to be rear
	channel.
"ZONE2 F"	Sub source (Auxiliary input source) is to be front
	channel.

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.

Display	Setting
"SPRM ON"	Plays sound using the Supreme function.
"SPRM OFF"	Plays the original sound stored in the audio file.

⁄

•The sound effect may be imperceptible depending on the relationship between the audio file format and setting.

•This function is not available on iPod.

Function of KDC-X591

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

1Select AMP Control modePush the Control knob towards up or down. Select the "AMS CTRL" display.2Enter AMP Control mode

Press the Control knob for at least 1 second.

3Select the AMP Control item for adjustment Push the Control knob towards up or down.

⁄

•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.

4Adjust the AMP Control item

Push the Control knob towards right or left.

5Exit AMP Control mode Press the [MENU] button.

⁄

•You cannot use the LX AMP operation during standby mode.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station.

Display	Setting
"CRSC ON"	The CRSC is ON.
"CRSC OFF"	The CRSC is OFF.

⁄

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

24 English