English 5
Getting Started

Canceling the display

demonstration

The display demonstration is always turned
on unless you cancel it.
When you turn on the power (or after you
reset the unit), the display shows:
[CANCEL DEMO] \ [PRESS] \ [VOLUME
KNOB]
1 Press the volume k nob.
[YES] is selected as the initial setup.
2 Press the volume k nob again to confirm.
[DEMO OFF] appears.
If no operation is d one for about 15 seconds
or if you turn the volume knob to select
[NO] in step 2, [DEMO MODE] appears and
the display demonstration starts.

Setting the demonstration mode

1 Press the volume k nob to enter
[FUNCTION].
2 Turn the volume knob to se lect [DEMO
MODE], then press to enter.
3 Turn the volume knob to se lect [ON] or
[OFF].
If [ON] is selected, display demonstration
starts if no operation is done for about 20
seconds.
4 Hold to finish the procedure.

Adjusting the clock

1 Press the volume k nob to enter
[FUNCTION] mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to se lect [CLOCK],
then press to enter.
4 Turn the volume knob to se lect [CLOCK
ADJUST], then press to enter.
Clock hour flashes on the display.
5 Turn the volume knob to ad just the hour,
then press to enter minute adjustment.
Clock minutes flashes on the display.
6 Turn the volume knob to ad just the
minute, then press to confirm.
Press 4 / ¢ to move between the
hour and minute adjustment.
7 Hold to finish the procedure.

Initial settings before operations

1 Press SRC to enter [STANDBY] mode.
2 Press the volume k nob to enter
[FUNCTION] mode.
3 Turn the volume knob to se lect [INITIAL
SET], then press to enter.
4 Turn the volume knob to ma ke a
selection, then press to confirm.
See table below for selection.
5 Hold to finish the procedure.
Item Selectable setting (Preset:*)
PRESET TYPE NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each prese t button regardle ss of the selecte d band (FM1/ FM2/ FM3/ AM).
KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.
TDF ALARM ON: Activates the alarm if yo u forgot to detach the f aceplate when ACC is set to OFF. ; OFF *: Cancels.
BUILT-IN AUX ON *: Enable s “AUX” in source selection. S ound of the connect ed external comp onent is produced thr ough the car
speakers. ; OFF: Disables “AUX” in source selection.
CD READ 1 *: Automatica lly distinguishes b etween audio fil e disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio f ile disc is played.
SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum p erformance.
F/W UP xx.xx YES: Starts upgrading the firmwa re. ; NO *: Cancels (upgrading is not activated).
For details on how to update the firmware, see: w ww.kenwood.com/cs/ce/
B64-4920-00_02_M_English.indd 5 11/12/21 9:43