General features
Volume
Increasing VolumeTurn the [VOL] knob clockwise.Decreasing VolumeTurn the [VOL] knob counterclockwise.Attenuator
Turning the volume down quickly.
Press the [ATT] button.Each time you press the button, the Attenuator turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator blinks.
Audio Control
1Select the source to adjust Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
2Enter Audio Control mode Press the [VOL] knob.3Select the Basic Audio item to adjust Press the [VOL] knob.Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Basic Audio item Turn the [VOL] knob.Adjustment Item | Display | Range |
Rear Volume | "REAR VOLUME" | 0 — 35 |
Subwoofer level | ||
System Q | "USER"/"ROCK"/ | User/Rock/ |
| "POPS"/"EASY"/ | Pops/Easy/ |
| "TOP40"/"JAZZ"/ | Top 40/Jazz/ |
| "NATURAL" | Natural |
Bass level* | "BASS LEVEL" | |
Middle level* | "MIDDLE LEVEL" | |
Treble level* | "TREBLE LEVEL" | |
Balance | "BALANCE" | Left 15 — Right 15 |
Fader | "FADER" | Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
*Source tone memory: Puts the set up value in the memory per source.
•You can recall the best sound setting preset for different types of music.
•Change each setting value with the <Speaker Setting> (page 9). First, select the speaker type with the Speaker setting.
•"USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.
5Exit Audio Control mode Press any button.Press a button other than the [VOL] knob and [ATT] button.
Audio Setup
Setting the Sound system, such as Cross over Network.
1Select the source to adjust Press the [SRC] button.
Refer to <Selecting the Source> (page 7).
2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [VOL] knob.Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Setup the Audio item Turn the [VOL] knob.Adjustment Item | Display | Range |
Front High Pass Filter | Through/40/60/80/100/120/ | |
|
| 150/180/220 Hz |
Rear High Pass Filter | Through/40/60/80/100/120/ | |
|
| 150/180/220 Hz |
Low Pass Filter | 50/60/80/100/120/Through Hz | |
Subwoofer Phase | "SW PHASE" | Reverse (180°)/ Normal (0°) |
Volume offset | ||
Loudness | "LOUD" | OFF/ON |
Dual Zone System | "2 ZONE" | OFF/ON |
⁄
•Volume offset: Sets each source’s volume as a difference from the basic volume.
•Loudness: Compensates for low and high tones
during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)
8 English