General features

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Removing the Faceplate

1Press the Release button. Drop open the faceplate.

2Drawing the faceplate to left side pull it to forward and remove it.

¤

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Keep the faceplate in its faceplate case while detached.

•Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate1Align the shaft on the unit with the depression on the faceplate.2Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to use the unit.

External Display Selection

Changing the display in the connected External Display.

1Enter External display select mode

Using the Control knob, select "DISP" > "DOUT". For the operation method, refer to <Function Control mode> (page 10).

"DISP Out Select" is displayed.

2Select the display

Turn the Control knob or push it towards left or right.

Select your desired display.

3Exit display control mode Press the Control knob.

14 English