In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this unit’s clock.

Display

Setting

"SYNC : ON"

Synchronizes the time.

"SYNC : OFF"

Adjust the time manually.

• It takes 3 to 4 minutes to synchronize the clock.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display

Setting

"DSI : ON"

LED flashes.

"DSI : OFF"

LED OFF.

In Standby mode

Selectable Illumination

Selecting the button illumination color as green or red.

Display

Setting

"Button : Red"

The illumination color is red.

"Button : Green"

The illumination color is green.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"Display : ON"

Keeps the display on.

"Display : OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

Set the Display Illumination Control when the <Demonstration mode Setting> (page 35) is set to OFF.

When the display is off, pressing any key will turn on the display.

When the display is off, you cannot perform any operation except for the following:

Volume

Attenuator

Selecting the source

Turning off the power

During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"Dimmer : ON"

The display dims.

"Dimmer : OFF"

The display doesn’t dim.

English 29