Notes

•If you experience problems during installation, consult your Kenwood dealer.

•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

•Characters that conform to ISO 8859-1 can be displayed.

•Characters that conform to ISO 8859-5 or ISO 8859- 1 can be displayed. Refer to <Selecting Russian Characters> (page 33). (Russian sales area of KDC- W7537UY/W7037Y)

•The RDS feature won’t work where the service is not supported by any broadcasting station.

•There are places in this manual where lit indicators are described; however, the only time an indicator will light is in the following settings.

When Status Display is set to On as mentioned in <Status Setting> (page 11).

•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

How to reset your unit

•If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.

•Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, refer to <Playing USB (iPod) device> (page 21).

•Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

¤

•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 35).

About KENWOOD "Music Editor" of PC application attached to KDC-W7537U/ W7537UY

•"Music Editor" is recorded in the CD-ROM attached to this unit.

•Refer to the attached installation manual for the installation method of "Music Editor".

•Refer to the user’s manual recorded in the installation CD-ROM and Help of "Music Editor" for the operation method of "Music Editor".

•The unit can play CD/ USB device created by "Music Editor".

•Information about "Music Editor" upgrade is put on the site, www.kenwood.com.

4 English