Menu system
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP:ON" | The |
"AMP:OFF" | The |
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel sound in the Dual Zone System.
Display | Setting |
"Zone2:Rear" | Sub source (Auxiliary input source) is to be rear |
| channel. |
"Zone2:Front" | Sub source (Auxiliary input source) is to be front |
| channel. |
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"AMP Bass:Flat" | Bass boost level is flat. |
"AMP Bass:+6" | Bass boost level is low (+6dB). |
"AMP Bass:+12" | Bass boost level is mid (+12dB). |
"AMP Bass:+18" | Bass boost level is high (+18dB). |
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass:+18" will not work correctly even if it is selected.
34 English
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display | Setting |
"AMP FREQ:Normal" | Boost with the normal central frequency. |
"AMP FREQ:Low" | Drop the normal central frequency 20%. |
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1Select AMP Control modePush the Control knob towards [FM] or [AM]. Select the "AMP Control" display.2Enter AMP Control modePress the Control knob for at least 1 second.
3Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM].
•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
4Adjust the AMP Control itemPush the Control knob towards [4] or [¢].
5Exit AMP Control mode Press the [MENU] button.
•You cannot use the LX AMP operation during standby mode.
News Bulletin with Timeout Setting
The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited.
Display and Setting
"News:OFF"
"News:00min"
…
"News:90min"