Kenwood KDC-448U, KDC-BT848U, KDC-X595, KDC-X895 Display, Overview, Press the, Initial setting, Enter Function setting mode, 6 Exit Function setting mode, 5 Set the Initial setting item

Initial setting

Configures initial settings of this unit.

1 Select Standby Press the [SRC] button. Select the “STANDBY” display.

2 Enter Function setting mode

Press the Control knob for at least 1 second.

3 Select the Initial setting mode

Turn the Control knob to select “Initial Settings”, and then press the Control knob.

“F/W Update #.##” Upgrades the firmware.

Selecting “YES” and then pressing Control knob starts upgrading the firmware.

For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/

( : Factory setting)

5 Set the Initial setting item

Turn the Control knob to select desired value, and then press the Control knob.

The previous item is displayed.

6 Exit Function setting mode

4 Select the desired Initial setting item	Press the [	] button for at least 1 second.
Turn the Control knob to select Initial setting
item, and then press the Control knob.

Display		Overview
“Initial Settings”
	“Source Select”	Select “2” to change the source selection
		method. Press the [SRC] button, turn the
		Control knob to select the source, and then
		press the Control knob to determine it.
		1 / 2
	“Key Beep”	Setting the operation check sound (beep
		sound) ON/OFF.
		“ON” / “OFF”

“Function Language” Changes the display language of items in Function setting.

“English” / “Français” / “Español”

“Built-in AUX”	Sets whether to display AUX during source
	selection.
	“ON” / “OFF”
“CD Read”	Sets the method for reading CD.
	When unable to play special format CD, set
	this function to “2” to force playing. Note that
	some music CDs may be unplayable even
	when set to “2”.
	In addition, audio files cannot be played when
	set to “2”. Normally, keep this set to “1”.
	1: Automatically distinguishes between audio
	file disc and music CD when playing disc.
	2: Forces playing as music CD.
“Built-in AMP”	Selecting “OFF” turns off the built-in amplifier.
	Turning off the built-in amplifier improves the
	quality of the sound from Preout.
	“ON” / “OFF”
“Speaker Select”	Fine-tuning so that the System Q value is
	optimal when setting the speaker type as
	follows;
	“OFF”: OFF
	“5/4inch”: For 5 & 4 in. speaker
	“6x9/6inch”: For 6 & 6x9 in. speaker
	“O.E.M.”: For the OEM speaker

English 33