Kenwood KDC-448U, KDC-BT848U, KDC-X595, KDC-X895 Range, Display, Audio item, Audio control, 4Adjust the Audio item, 5Exit Audio control mode, 3Select the Audio item to adjust

Audio adjustments

Audio control

You can adjust following Audio Control items;

	Display			Audio item	Range
	“SubWoofer Level”			Subwoofer level	–15 — +15 (dB)
“Bass Boost”				Bass Boost	Level1/Level2/OFF
“System Q”				Preset Equalizer	“Rock”/ “Pops”/ “Easy”/
				curve	“Top40”/ “Jazz”/ ”Game”/
					“Natural”/ “User”‡
	“Bass Adjust”
		“Bass Center FRQ”		Bass Center	40/50/60/70/80/100/
				Frequency*	120/150 (Hz)
			“Bass Level”	Bass level	–8 — +8 (dB)
		“Bass Q Factor”		Bass Q Factor*	1.00/1.25/1.50/2.00
		“Bass EXT”		Bass Extend*	OFF/ON
	“Middle Adjust”
		“Middle Center		Middle Center	0.5/1.0/1.5/2.0 (kHz)
		FRQ”		Frequency*
		“Middle Level”		Middle level	–8 — +8 (dB)
		“Middle Q Factor”		Middle Q Factor*	1.0/2.0
	“Treble Adjust”
		“Treble Center FRQ” Treble Center			10.0/12.5/15.0/17.5 kHz
				Frequency*
			“Treble Level”	Treble level	–8 — +8 (dB)
	“Balance”			Balance	Left 15 — Right 15
“Fader”				Fader	Rear 15 — Front 15
“2Zone Rear Volume”				Rear volume during	0 — 35
				Dual zone
	“SubWoofer”			Subwoofer output	OFF/ON
“Detailed Settings”
		“HPF Front”		Front High Pass	Through/40*/60*/80/
				Filter	100/120/150/180/220*
					(Hz)
			“HPF Rear”	Rear High Pass Filter	Through/40*/60*/80/
					100/120/150/180/220*
					(Hz)
			“LPF SubWoofer”	Low Pass Filter	50*/60/80/100*/120/
					Through (Hz)
			“SubWoofer Phase” Subwoofer Phase		Reverse (180°)/
					Normal (0°)
			“2Zone”	Dual Zone System	ON/OFF
		“2Zone F/R Select”		Dual Zone output	Rear/Front
				channel
			“Supreme”	Supreme setting	ON/OFF
		“Audio Preset”		Audio Preset	Recall/Memory
				memoy†
			“Volume Offset	Volume offset	–8 — ±0 (dB)
		ADJ”			(AUX: -8 — +8)

*Function of KDC-X895/ KDC-X595.

†Refer to <Audio preset Memory> (page 8), <Audio preset recall> (page 8).

‡“User”: The customized Bass, Middle, and Treble levels are effective.

⁄

•You can set Bass, Middle, and Treble for each source. About Supreme

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).

Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

•About Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-When “2Zone” is set to “ON”, the main source sound and AUX input sound are output to the front speakers and rear speakers separately.

-Set up the channel of sub source by “2Zone”.

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by Control knob.

-Adjust the volume of Rear channel by “2Zone Rear Volume”.

-The Audio Control has no effect on sub source.

-When Bluetooth audio source is selected, set “2Zone F/R Select” to “Rear”. “2Zone” cannot be turned “ON” when this is set to “Front”. While “2Zone” is turned “ON”, “2Zone F/R Select” function is disabled.

1Select the source to adjust Press the [SRC] button.

2Enter Audio control mode Press the Control knob.3Select the Audio item to adjust

Turn the Control knob to select the audio item for adjustment and then press the Control knob.

Press the [ ] button to return to the previous item.

4Adjust the Audio item

Turn the Control knob to display the value to set, and then press the Control knob.

The previous item is displayed.

5Exit Audio control mode

Press the [] button for at least 1 second.

English 7