Kenwood KDC-448U, KDC-BT848U, KDC-X595, KDC-X895 Display, Overview, Press the [ ] button, Enter Bluetooth mode, Bluetooth detail setting, Exit Function setting mode, Enter Function setting mode

 KDC-X895  KDC-BT848U Press the [ ] button.

 KDC-X595  KDC-448U 

Press the [LOG] button for at least 1 second. “BT MODE” is displayed.

2 Enter Function setting mode

Press the Control knob for at least 1 second.

3 Select Bluetooth detail setting mode

The item can be selected and determined as follows.

“Settings” > “Detailed Settings”

To select the item, turn the Control knob. To determine the item, press the Control knob.

4 Select the desired Bluetooth detail setting item

Turn the Control knob to select Bluetooth detail setting item, and then press the Control knob.

Enter Bluetooth mode

1

Bluetooth setup

Bluetooth detail setting

Configures initial settings of this unit.

Function of KDC-X895,KDC-BT848U,KCA-BT300/BT200 (Optional Accessory)

Display		Overview
“Detailed Settings”
	“Auto Answer”	This function automatically answers (responds
		to) a call after lapse of the preset time interval
		for automatic answer.
		“OFF”: Does not answer the phone call
		automatically.
		“0”: Automatically answers the phone call
		at once.
		“1SEC” – “8SEC” – “99SEC”:
		Automatically answers the phone call after
		lapse of 1 – 99 seconds.
	“Auto Reconnect”	When “ON” is selected, re-pairing with the
		registered Bluetooth device starts automatically
		when pairing is disconnected.
		“ON” / “OFF”
	“Bluetooth HF”	You can specify output speakers for hands-free
	“Bluetooth HF/	voice communication and Bluetooth audio
	Audio”	sound.
		“Front” : Outputs sound from the front
		speakers.
		“All” : Outputs sound from the front and rear
		speakers.
	“Call Beep”	You can output a beep from the speaker when
		a call comes in.
		“ON” : Beep is heard.
		“OFF” : Beep is canceled.

52KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U

“MIC Gain”	Adjusts the sensitivity of the built-in
	microphone for a telephone call. Adjust the
	voice of caller. Setting to “+” increases the
	voice volume.
	Function of the KDC-X895, KDC-BT848U
	“-3” – ”0” – “+3”
“NR Level”	SReduces the noises generated by surrounding
	environment without changing the built-in
	microphone volume. Adjust the voice of caller
	when it is not clear. Setting to “+” increases
	the noise reduction.
	Function of the KDC-X895, KDC-BT848U
	“-3” – ”0” – “+3”
“Echo Cancel”	Sets the echo cancellation level.
	Function of the KDC-X895, KDC-BT848U
	“-2” – ”0” – “+2”
	(	: Factory setting)

5Set the Bluetooth detail setting item

Turn the Control knob to select desired value, and then press the Control knob.

The previous item is displayed.

6Exit Function setting mode

Press the [ ] button for at least 1 second.