Kenwood KDC-448U, KDC-BT848U, KDC-X595, KDC-X895 Preset tuning, Channel preset memory, Enter Preset memory mode Press the [PRESET] button, 2Enter Preset memory mode Press the [PRESET] button

Channel preset memory

Putting the channel in the memory.

1Select the channel to put in the memory Push the Control knob towards right or left.

2Enter Preset memory mode Press the [PRESET] button.

3Select a number and store it in the memory Turn the Control knob to select memory number, and then press the Control knob for at least 2 seconds.

Cancelling the Preset memory mode Press the [] button.

⁄

•Only the channel number is stored. Category information is not stored.

•If you press the [PRESET] button twice in step 2, Mix Station preset mode is entered with “Mixed Preset List” displayed. In this mode, different bands and tuner sources (Radio, Sirius, XM etc.) can be saved in the same preset layer, which allows you to recall the desired station without switching the bands or tuner sources.

Maximum of six stations can be preset in the Mix Station preset mode.

Once the Mix Station preset mode is set, you can enter the same mode by just pressing the [PRESET] button once in step 2.

Pressing the [PRESET] button twice returns to the normal Station preset mode.

Preset tuning

Recalling the channels in the memory.

1Enter Preset memory mode Press the [PRESET] button.

2Select the number you want to recall from the memory

Turn the Control knob to select recall number, and then press the Control knob.

Cancelling Preset tuning

Press the [] button.

English 59