NOTE

If no program can be found, "NO PTY" is displayed.

If you want to select another type of program, repeat steps 2 and 3 above.

Switching to Other Stations with the Same Type of Program:

When "PTY" is blinking in the display, perform auto seek tuning.

The tuner scans for another station with the same type of program.

Canceling Program Type Function During Its Operation:

Press the 38(PTY) button.

Confirming Program Type:

Press the DISP button.

The program type of the station currently tuned to will be displayed for five seconds. During that time, "Entry" will blink in the display.

NOTE

If you tune to frequencies for which no program type has been stored, "No Entry" will be displayed.

Radio Text Scroll

This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu.

To scroll automatically:

Press the DISP button to display the Radio Text. The display of the text will be scrolled repeatedly.

To scroll manually:

1Press the DISP or CLK button to change the upper part of the display to radio text.

2Pressing the DISP button for at least one second results in one scrolling display of the text.

NOTE

Please see the menu settings (page 39) about switching between manual scrolling and automatic scrolling.

Registration of a station as a PTY

You can register a station as a program type.

To register a non-RDS station as a program type:

1Tune your radio to the non-RDS station that you want to register as the program type.

2Press the 38(PTY) button to enter the program type selection mode.

3Press the FM/AM button to select the program type you want to register. Follow the instructions in 2 to enter the program type selection mode.

4Press the NAME.S button for at least two seconds.

The station will be registered as a program type, allowing it to be the target of frequency seeks just as RDS stations are.

5Press the 38(PTY) button to end the program type selection mode.

— 23 —