Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the ¡(EJECT) button. The faceplate will slide to eject the CD.
Press the ¡(EJECT) button to close the faceplate.
2CAUTION
•Do not attempt to insert a CD into the slot if another one is already there.
•The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will get stuck inside and can cause the unit to malfunction.
•When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.
NOTE
•The sound will be temporarily muted while the faceplate is moving.
•The only buttons that will work during the eject state are the ¡(EJECT), SRC, and ATT buttons, as well as the volume control button.
•When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.
Playing Other Disc mode
This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc control mode.
The disc will start playing.
NOTE
The external disc control mode will differ, depending on the unit that is connected.
Mode Display Examples
•"CD2" ...when a CD player is connected
•"DISC" ...when a disc changer is connected
•
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it.
Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is canceled when it reaches the beginning of a track, at which point normal play will automatically resume.
— 25 —