•Playable disc media
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
•Playable USB deviceUSB mass storage class, iPod with
Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
• Playing order of the Audio fileIn the example of folder/file tree shown below, the files are played in the order from ① to ⑩.
CD () <<: Folder v vv: Audio file
v
v
v v
v.
An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
⁄
•In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals.
•The word "iPod" appearing in this manual indicates the iPod connected with the
•For the supported formats and types of USB device, refer to www.kenwood.com/usb/.
•Install the USB device in the place where it will not prevent you from driving your vehicle properly.
•You cannot connect a USB device via a USB hub.
•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.
We shall have no compensation for any damage arising out of erasure of the stored data.
•No USB device comes with this unit. You need to purchase a commercially available USB device.
•For how to play the audio files recorded in a USB device, see <CD/Audio file (USB/iPod/Internal Memory) control features> (page 30).
•When connecting the USB device, usage of the CA- U1EX (option) is recommended.
Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.
About ODD (Offset Dual Differential) D/A SystemThe high quality sound play is to be done by ODD D/A System. Dual D/A converters are
Also, the ODD D/A System produces the data by which the sound data is offset on the minus side and converts the two signals (original and offset data) to the analog signal, which has less noise and distortion, by the synthetic process.
However, ODD D/A System will be disabled if the following settings are selected.
- When "2 ZONE" of <Audio Setup> (page 10) is "ON".
English 5