Function Control

Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.

: Can be set in other than standby state.

: Can be set in standby state.

: Can be set while Audio file source of CD/USB/iPod.

: Can be set while Audio file source of CD/USB (excluding iPod).

: Can be set while CD/ Disc changer source.

: Can be set while Disc changer source.

: Can be set during Tuner source.

: Can be set during FM reception.

: Can be set while accessing AUX source.

: Can be set only during playback of the iPod source. (USB source used when the iPod is connected)

: Can be set for sources other than the standby source by setting “2 ZONE” of <Audio Setup> (page 19) to “ON”.

: Can be set while a cell-phone is connected.

: Refer to the reference page.

— : Can be set during all sources.

⁄

•Refer to the respective page for information on how to set the items with reference page number.

•Only the items available to the current source are displayed.

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

1Enter Function Control modePress the [SEARCH] button for at least 1 second. ”FUNCTION” is displayed.2Select your desired setup item
Operation type

Operation

Movement between items

Turn the [AUD] knob.
Selection of item

Press the [AUD] knob.

Return to previous item

Press the [SEARCH] button.
Repeat selection and determination until your desired setup item is selected.Example:

MENU

DOT LINE

In this manual, the above selection is indicated asSelect “MENU” > “DOT LINE”.3Make a setting

Press the [AUD] knob or turn the [AUD] knob to select a setting value, and then press the [AUD] knob.

•The value of items with mark can be set by press the [AUD] knob.

•The value of items with mark can be set by pushing the [AUD] knob towards right or left.

•Some items require you to keep pressing the [AUD] knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the [AUD] knob is displayed in the Entry column in seconds.

•For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.

4Exit Function Control modePress the [SEARCH] button for at least 1 second.
8 KDC-BT7043U/ KDC-MP6043U