Connecting Wires to Terminals

AUX input (Stereo)

Use the mini-plug cable which is stereo type and does not have any resistance.

USB connector

Front side

Fuse (10A)

Steering remote control (Light Blue/Yellow)

REMO.CONT

To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required.

Rear output

RL Front output Sub Woofer output

FM/AM antenna input

Wiring harness (Accessory1)

 

To Kenwood disc changer/ External optional accessory

 

⁄ To connect these leads, refer to the relevant

 

instruction manuals.

White

 

White/Black

To front left speaker

Gray

 

Gray/Black

To front right speaker

Green

 

Green/Black

To rear left speaker

Purple

 

Purple/Black

To rear right speaker

If no connections are made, do not let the wire come out from the tab.

Power control wire (Blue/White)

P.CONT

Motor antenna control wire (Blue)

ANT.

CONT

TEL mute wire (Brown)

MUTE

Dimmer control wire (Orange / White)

ILLUMI

Car fuse box

Ignition wire (Red)

ACC

Battery wire (Yellow)

Ground wire (Black) · (To car chassis)

When using the optional power amplifier, connect to its power control terminal.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type or short pole type antenna.

Connect to the terminal that is grounded when either the telephone rings or during conversation. (KDC-MP6043U only)

⁄To connect the Kenwood navigation system, consult your navigation manual.

To car light control switch

Ignition key switch

Car fuse box (Main fuse)

–

+

Battery

34 KDC-BT7043U/ KDC-MP6043U