Connecting Wires to Terminals
| Power Cable 1 | Cigarette Lighter Plug | |
Digital output |
| To Cigarette | |
|
|
| Lighter Socket |
Video output (Yellow) |
| Fuse (5A) built in | |
|
| ||
Audio left output (White) |
|
|
|
Audio right output (Red) |
|
|
|
DVD Player back view | M4 X 5mm |
| Semusu Screw 4 |
|
| ||
|
|
| |
|
|
| (M4 x 5 mm) |
|
| M4 X | 5mm |
TV Monitor (Optional Accessory)
OTE REM
Battery
Ground wire 7 (Black) - (To car chassis)
AV Cable 8
Remote Control Sensor 2
Attaching Remote Control Sensor
1 Remove the backing paper from the Velcro tape on the back of the Remote Control Sensor.
2 After wiping off the dirt or oil from the attachment location, | Backing paper |
attach the Remote Control Sensor. |
|
⁄
•Wipe off the dirt or oil from the surface to which the Sensor is attached.
•Avoid locations under direct sunlight or near the TV monitor where
signals from the remote controller are not received easily.
• You can change the direction of the remote control sensor cable.
¤
•Connect the power cable 1 to the DVD player first, and connect it to the cigarette lighter socket last. Connecting it to the cigarette lighter socket first may blow the fuse.
20