Safety precautions

2WARNING

 

2CAUTION

 

NOTE
To prevent injury and/or fire, take the following precautions:

•Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts.

•When extending the battery or ground. cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the cable coating.

•To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

•Make sure not to get your fingers caught between the faceplate and the unit.

•If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

•Be careful not to drop the unit or subject it to strong shock.The unit may break or crack because it contains glass parts.
To prevent damage to the machine, take the following precautions:•Make sure to ground the unit to a negative 12V DC power supply.•Do not open the top or bottom covers of the unit.

•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

•To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.

•When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

•To prevent short circuits when replacing a fuse, first disconnect the wiring harness.

•Do not place any object between the faceplate and the unit.

•During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

•If you experience problems during installation, consult your Kenwood dealer.

•If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.

 

 

GRAPHIC EQUALIZER

KGC-9044

 

 

 

 

 

 

SPEANA

1

 

 

 

 

 

 

 

 

 

 

S.A

DEMO

 

 

 

 

 

 

 

 

 

 

 

2

9 PATTERN

 

 

 

 

 

 

 

 

 

4V

 

 

SPECTRUM

 

 

 

 

 

 

 

 

 

 

3

ANALYZER

 

 

 

 

 

 

 

 

 

PREOUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUBWOOFER LEVEL

 

 

 

 

 

 

 

 

 

DISP

MENU

 

ADJUSTABLE

 

 

 

 

 

 

 

 

 

 

 

 

60

120

250

380

500

750

1k

2k

4k

8k

16k

 

Reset buttonCleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth.

Cleaning the Unit

If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.

2CAUTION

Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.

— 3 —