Each time you press the S.A button, the spectrum analyzer display switches as follows;
▼
1"SCAN MODE ON":Displays 2 to 9 are automatically shown in succession for about five seconds each.
▼
2"PEAK HOLD"
▼
3"LASER"
▼
4
▼
5"FIREWORKS"
▼
6"SQUASH"
▼
7
You can give a demonstration of the spectrum analyzer and the equlizer curves to know what displays this unit has.The DEMO indicator lights up when the demonstration function is on.
Starting Demonstration:Pressing the S.A button for more than one second will turn on demonstration mode.
Cancelling Demonstration:Press the S.A button.
Input Sensitivity AdjustmentAdjust this control according to the
1Removing the faceplate (see page 8)
2Adjusting the input sensitivity volume.
▼
8"BLIZZERD"
▼
9"KISS"
▼
0"SIDE WAVE"
▼
Input sensitivity decreased.
Input sensitivity increased.
!"EQ CURVE":Equalizer curve
▼
@"SPEANA OFF":Spectrum analyer off
MAX
MIN
NOTE
The dimmer function is not available for units if the dimmer cable is not connected.
3Reattaching the faceplate (see page 8)
NOTE
Refer to “Specifications” on the centre unit’s instruction manual about the
If the input sensitivity is not adjusted correctly, sound distortion may occur.
| (2V) |
MIN | MAX |
(4V) | (1V) |
(Value of input sensitivity)
— 7 —