speed control
The following speeds area guide only and will vary depending upon the
quantity and the temperatureof the ingredients being mixed etc.
Turnthe speed control clockwise to obtain speeds ‘min’ through to ‘max’.
K-beater ●creaming fat and sugar start on min, gradually increasingto ‘max’.
●beating eggs into creamed mixtures 4- ‘max’.
●folding in flour,fruit etc min - 1
●all in one cakes start on min speed, gradually increase to max.
●rubbing fat into flour min - 2.
high temperatureflexible beater ●creaming fat and sugar start on min, gradually increasingto 3.
●scraping mixes both hot and cold from the sides of the
bowl start on min gradually increasingto 3.
●sauteing vegetables, stirring risotto and polenta etc., use .
whisk ●Gradually increaseto ‘max’.
dough hook ●Start on ‘min’, gradually increasing to 1.
stirring tool ●Use with the stir settings only , , .
stir settings
Toselect the stir settings turn the speed control anti-clockwise These are most suitable when the mixer
is used in the cook mode. Please note, to use the stir speeds all outlet covers must be fitted.
–Use this setting when a constant slow speed is required e.g. stirring sauces.
– When the speed controlis set to this position, the mixerwill intermittently operate on a slow
speed once every 5 seconds for approximately2 revolutions.
– When the speed controlis set to this position, the mixer will intermittently operate on a slow
speed once every 30 seconds, making it suitable for stirring casserolesetc.
Return the speed control to the off‘O’ position to stop the operation.
Note:
●Whenever a speed is selected, the speed indicator light will flash.
●A high pitched sound may be heardfrom the appliance when in use. This is normal.
to use the mixer to cook food
IMPORTANT
●Make surethe induction area, temperature sensors and external surface of the bowl base are clean.
Failureto do this will affect the heat sensor, resulting in poor cooking performance.
●Check that all the outlet covers including the heatshield are fitted. If they are not correctly fitted the
heating function will not operate.
●Always use oven gloves to removethe bowl and tools after cooking.
1 Assemble the mixer following the instructions on page 9.
2 Turn the temperature control to the required temperature.
●Heating will not commence unless a speed is selected.
3 Turn the speed control to the desired speed which will switch on the motor and the heater.Both
indicator lights will flash.
4 Once the set temperature is reached, the temperature indicator light will illuminate continuously.
However,during cooking the light will start to flash if the temperature changes indicating that the mixer
is trying to maintain the set temperature(please read introduction page 4).
●If the bowl temperatureexceeds 60°C, for safety reasons the speed is automatically limited even if a
higher speed has been selected. The speed will not automaticallyincrease when the temperature drops
below 60°C. The speed controlmust be switched off first and the desired speed reselected.
●Note: Each time the timer/temperatureselector button is pressed, the display will alternate between the
timer display and the temperatureof the bowl contents.
5 To stop or pause the mixing and heating process, return the speed control to the off ‘O’ position. To
resumethe operation select a speed.
10