NOTE

The Navigation mute function cannot be used unless a TEL mute cable is connected to the KENWOOD Navigation System.

Contrast Adjustment

This adjustment permits easy viewing of the display.

To adjust the contrast:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Contrast Adjustment function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "CONT ##" in the display, indicating that the Contrast Adjustment mode is on.

3Switching settings

Press either the AM or FM button.

Press the FM button to change the setting values higher, and press the AM button to change them lower. Settings may be made from 0 to 10.

4Press the MENU button to end the menu mode.

NOTE

The "##" display in the contrast adjustment mode will differ depending on the setting. The initial setting value is "5".

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Removing Faceplate:

Press the release button and drop open the faceplate.

In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it.

£ Release button

 

 

 

 

 

 

POWER

SRC

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

FM

CLK

 

 

 

 

 

 

 

 

DISC

 

 

 

 

 

 

 

PTY

 

 

SCAN

RDM

REP

D.SCN

M.RDM

NAME.S

 

DISC

ATT

DISP

AM

 

LOUD

 

 

 

 

 

 

 

 

 

 

 

5

6

 

MENU

 

1

2

3

4

 

AUD

 

NOTE

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached.

•Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching Faceplate:

Hold the faceplate so that the operation face faces the front toward you and press until it locks. The faceplate will be set and the unit will be operational.

NOTE

When there is difficulty in setting the faceplate, align the depression on the left side of the faceplate with the shaft of the unit, then lock.

£

AM

FM

Shaft

Depression

— 27 —