Kenwood KMD-870R A–4, A–5, A–6, A–7, Red, A–8, B–1, B–2, B–3, B–4, B–5, B–6, B–7, B–8, Gray, Black, White, Green, Yellow, Dimmer, Purple, Battery, Speaker, Functions

English

Connecting Cables to Terminals

Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
	FM/AM antenna
Antenna Cord (ISO)	input
	Rear left output
	(White)

Connector Function Guide

Pin Numbers for	Cable Colour	Functions
ISO Connectors
External Power
Connector
A–4	Yellow	Battery
A–5	Blue/White	Power Control
A–6	Orange/White	Dimmer
A–7	Red	Ignition (ACC)
A–8	Black	Earth (Ground)
		Connection
Speaker
Connector	Purple	Rear Right (+)
B–1
B–2	Purple/Black	Rear Right (–)

Fuse (10A)

	Front left
	output (White)
	Front right
KENWOOD disc	output (Red)
changer / DAB	Rear right
control input	output (Red)

NOTE
To connect the Disc changer	Wiring harness
or DAB unit, consult each
	(Accessory1)
manual.

TEL MUTE

Connect to the terminal that is grounded when either the

B–3	Gray	Front Right (+)
B–4	Gray/Black	Front Right (–)
B–5	White	Front Left (+)
B–6	White/Black	Front Left (–)
B–7	Green	Rear Left (+)
B–8	Green/Black	Rear Left (–)

Battery cable (Yellow)

Ignition cable (Red)

TEL mute cable (Brown)

If no connections are made, do not let the cable come out from the tab.

telephone rings or during conversation.

NOTE

To connect the KENWOOD navigation system, consult your navigation manual.

A–7 Pin (Red)

					P.CONT
A–4 Pin (Yellow)					Power control cable
Connector A					(Blue/White)
	8	6	4	2
	7	5	3	1
Connector B	8	6	4	2
	7	5	3	1

Connect either to the power control terminal when using the optional power amplifier.

— 30 —