Safety precautions
English
NOTE
•If you experience problems during installation, consult your Kenwood dealer.
•If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.
|
|
|
|
| POWER | SRC |
|
|
|
|
|
| OFF |
| |
|
|
|
|
|
| FM | CLK |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| DISC |
|
|
|
|
|
| PTY |
|
|
|
|
|
| NAME.S |
| DISC |
ATT | SCAN | RDM | REP | D.SCN | M.RDM TI VOL ADJ DISP | AM |
|
LOUD |
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | MENU |
|
AUD |
|
Handling Mini discs
•The MD shutter is designed so that it cannot be opened. If forced open, the cartridge will be damaged and use of the MD will no longer be possible. If the shutter has been opened due to some cause, be careful not to touch the recording portion with a finger. Doing so will cause the sound to skip.
Lens Fogging
In cold climates, there may be a period after you turn on your vehicle's heater when the lens that guides the laser beam used in your MD player fogs up. If this happens, you cannot play mini discs. Take out discs and the fogging will disappear. If it does not return to normal after several hours, contact your Kenwood dealer.
The marking of products using lasers (Except for some areas)
CLASS 1
Reset button
•Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C).
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
2CAUTION
Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.
•Do not use an MD that has a peeling label. Use of an MD that has a loose or peeling label may cause problems, such as the label coming off inside the player and the resultant inability to eject the MD.
•Wipe away dirt or dust from the cartridge surface with a dry cloth before use. Using an
•Do not leave the MD in the unit for a prolonged period. The ejected MD should be placed in an MD case for storage.
•Do not leave the MD in a place exposed to direct sunlight (such as on a instrument panel) or in other places that reach high temperatures. The MD cartridge will become misshapen and will no longer be usable.
•MDs designed for use with data cannot be used. Please use MDs designed for music.
•Do not use lens cleaners. Doing so will lead to breakdown.
LASER PRODUCT
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
US and foreign patents Iicensed from Dolby Laboratories Licensing Corporation.
— 4 —