NOTE Changing the Preset Button Settings for Programme Type After selecting the type of programme to be stored in a certain preset button, hold down that button for two seconds or more. The previously stored data for that button are erased and the new programme type is stored.

3Seeking the selected programme type

Press the 4 or ¢ button to make a seek of frequencies with your selected type of programme.

The display blinks and the seek starts.

"PTY" blinks in the display for about 30 seconds.

If you make no key input in 30 seconds, the PTY selection mode will turn off automatically.

NOTE

If no programme can be found, "NO PTY" is displayed.

If you want to select another type of programme, repeat steps 2 and 3 above.

Switching to Other Stations with the Same Type of Programme: When "PTY" is blinking in the display, perform auto seek tuning.

The tuner scans for another station with the same type of programme.

Cancelling Programme Type Function During Its Operation:

Press the 38(PTY) button.

To scroll automatically:

1Press the DISP button to display the Radio Text. The text will be displayed in one scrolling display.

2Press the DISP or CLK button to change the upper part of the display to radio text.

3Holding down the DISP button for one second or more results in one scrolling display of the text.

NOTE

Please see the menu settings (page 38) about switching between manual scrolling and automatic scrolling.

Radio Text Scroll

This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu.

To scroll manually:

1Press the DISP or CLK button to change the upper part of the display to radio text.

2Holding down the DISP button for one second or more results in one scrolling display of the text.

— 21 —