•You must purchase the optional KCA-S210A/CA-C1AX/KDC- CPS82/KDC-CX82/KDC-CPS85/KDC-CX85 device before you can use this function.

•You can choose to send the AUX input through the rear channel, and the unit’s tuner or MD source through the front channel.

•The Bass, Treble and Loudness adjustments do not affect the rear channel.

•When the Dual zone system is turned on, the External disc control features cannot be used.

•When you set the Dual zone system to on whilst the non-fading preout is switched on, the sound of the non-fading preout does not be outputted.

dB (Sound Coordinate system)

When this system is set to on, the sound coordinate factors (Bass frequency, Bass quality, Bass extension, and Treble frequency) appear during the audio control mode.

Display and setting:

"dB set ON" : The sound coordinate factors appear and can be adjusted."dB set OFF" : The sound coordinate factors are not appeared.External Amp ControlAdjust the bass boost level of the external amplifier using the main unit.

Display and setting:

"AMP BASS Flat" : Bass boost level is flat."AMP BASS +6" : Bass boost level is low (+6dB)."AMP BASS +12" : Bass boost level is high (+12dB).

NOTE

As of December 1999, the power amplifiers controllable by the main unit are as follows: KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T.

Manual Open Button Setting

By pressing the button hidden behind the upper left part of the faceplate during forced closing, you can open the faceplate. Follow the directions below to preset the number of times that this button needs to be pressed in order to open the faceplate.

Display and setting:

"OPEN SW 1" – "OPEN SW 3"

NOTE

The initial setting value is "1" .

— 35 —