Alpine CVA-1003R owner manual Erasing Disc Title, Controlling CD Changer, 21-EN

Press and hold the -/Jbutton for at least 2 seconds to activate the title scanning mode. The title in the display will blink.

Press the g DN or f UP button repeatedly until the disc title you want to erase is displayed.

Press and hold the -/Jbutton for at least 2 seconds to erase the disc title displayed.

CD Player/Changer Operation (Optional)

Erasing Disc Title

1 When the monitor display is open, press the TITLE button to select the disc titling mode. Then, press and hold the button for at least 3 seconds.

2

3

4

5 Press and hold the TITLE button for at least 3 seconds to cancel the disc title erasing mode.

NOTE

You cannot erase a CD-TEXT.

2 Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

NOTES

•After selecting the desired disc, you can operate in the same way as for the CVA-1003R CD player.

For details, please see the CD Operation section.

•When the "FUNC" indicator is lit in red in the monitor display, or is lit in the sub display, the disc select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the FUNC button. In the sub display, this changes the "D" indicator to "d." The "FUNC" indicator is lit in yellow on the monitor display. Then press the desired Preset button. With the FUNC button activated, the Preset buttons 1 to 6 will represent discs 7 to 12 respectively.

Controlling CD Changer

An optional 6-disc or 12-disc CD Changer may be connected to the CVA-1003R if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CVA-1003R, the CD Changer will be controllable from the CVA-1003R.

Using the KCA-400C (the Multi-Changer Switching device) multiple changers can be controlled by the CVA-1003R.

See the Multi-Changer Selection section on page 22 for selecting the CD Changers.

NOTE

The controls on the CVA-1003R for CD Changer operation are operative only when a CD Changer is connected.

1 Press the SOURCE button to activate the CD changer mode. The display shows the disc number and track number.

NOTE

The source indicator varies depending on the connected source.

21-EN