Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
1 When the monitor display is open, press the bass engine button. Bass engine mode is displayed in the monitor display.
2 Press the Preset 2 button to select the desired mode.
3 Press the g DN or f UP button to adjust the selected mode.
•Treble Level :
You can emphasize the treble frequency.
•Treble center frequency:
10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz Emphasizes the displayed Treble frequency ranges.
4 Press the bass engine button to return to the normal mode.
NOTES
•If no buttons are pressed within 5 seconds, the Treble control setting will be turned off automatically.
•Depending on the type of external audio processors connected to the unit, you may not be able to set some settings.
•The settings of the Treble will be individually memorized for each source (FM, MW, LW and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.
Other Useful Features
Operation with the monitor display closed
You can set the Treble control with the monitor display closed.
1 Press the bass engine button.
2 Press the Preset 2 button. TREBLE is displayed for 2 seconds in the sub display, then the value of TREBLE Level blinks.
3 Each time you press the Preset 2 button, the blinking shifts.
Example of sub display
4 Press the g DN or f UP button to adjust the selected mode.
