Basic Operation
MUTE OPEN/CLOSE
ANGLE 7 8
7 8
MODE/LOUD
Lowering the Monitor
1 Press the OPEN/CLOSE button.
The unit will beep 3 times and lower the monitor automatically.
NOTES
•The
•If the monitor touches an obstacle while it is being lowered, the unit will stop lowering the monitor immediately.
Should this occur, remove the obstacle and press the OPEN/CLOSE button again to lower the monitor.
Selecting the Monitor's Opening Position
The monitor's opening position has 2 settings.
1 Press and hold the OPEN/CLOSE button for at least 2 seconds while the monitor is being raised. Each press changes the monitor position back or forth.
Adjusting the Monitor Viewing Angle
Adjust the monitor's angle for better visibility.
1 Press the ANGLE 7 8 buttons to adjust the monitor's angle so the screen will be in the best viewing position. Each press of the buttons produces a beep and changes the screen angle between 40 and 105 degrees.
When you press and hold the 7 or 8 (ANGLE) button for at least 2 seconds, the monitor's angle keeps moving until you release the button.
NOTES
•If the monitor touches an obstacle while the angle is being adjusted, the unit will stop the screen immediately.
Should this happen, remove the obstacle and press the ANGLE 7 or 8 button again.
•The screen colour will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.
•If the voltage of the vehicle's battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.
CAUTION
Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
