Alpine CVA-1003R owner manual Multi-ChangerSelection, 22-EN, CD Player/Changer Operation Optional

CD Player/Changer Operation (Optional)

BAND

SOURCE

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers.

1 Press the SOURCE button on the CVA-1003R to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (optional) to activate the CD Changer mode. Proceed to step 3 below to select the desired CD Changer.

2 Press the BAND button on the CVA-1003R or the Remote Control to activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active for 3 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show "NO CHANGER."

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see "CD Player Operation" section.

NOTE

If an optional CD/MD/DVD player is connected to the unit, the disc mode can be switched each time you press the BAND button (see "Switching Disc Mode" on page 41).

22-EN