| Other Useful Features |
Adjusting Source Signal Levels | 3 Press the g DN or f UP button to select |
| the desired setting. |
|
If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level as follows.
1 When the monitor display is open, press and hold the SETUP button for at least 2 seconds. The SETUP screen appears.
2 Press the Preset 5 button to select the FM setting mode. Press the Preset 5 button again to select FM LEVEL.
To set another setting, press the Preset 5 button or another Preset button.
3 Press the g DN or f UP button to select the FM signal level HIGH or LOW to make the signal levels between the FM band and CD player closer.
To set another setting, press the Preset 5 button or another Preset button.
4 After setting is completed, press the SETUP button to return to normal mode.
Switching the Tuner Mode
The
1 When the monitor display is open, press and hold the SETUP button for at least 2 seconds. The SETUP screen appears.
2 Press the Preset 5 button to activate the FM setting mode. Press the Preset 5 button again to select CONDITION.
NORMAL: Standard setting
STABLE: Noiseless priority setting
To set another setting, press the Preset 5 button or another Preset button.
4 After setting is completed, press the SETUP button to return to normal mode.
Subwoofer Control On and Off
1 When the monitor display is open, press and hold the SETUP button for at least 2 seconds.
2 Press the Preset 6 button to set to the SYSTEM setting mode. Press the Preset 6 button again to select the SUB W. mode.
3 Press the g DN or f UP button to select Subwoofer ON or OFF.
To set another setting, press the Preset 6 button or another Preset button.
4 After setting is completed, press the SETUP button to return to normal mode.
NOTES
•Initial mode is "Subwoofer ON."
•Set to "Subwoofer OFF" unless the subwoofer is used.
•When the subwoofer is turned on, the subwoofer output level can be adjusted. For more details, refer to the Adjusting Volume/Balance/Fader.
