ADJUSTING TOP THREAD TENSION

90% of your sewing will be accomplished with the word “AUTO” exposed on the tension control dial on top of the machine.

Helpful Hint: A slight adjustment to the + or - side of AUTO will improve sewing appearance.

STRAIGHT STITCHING

The good looking appearance of your stitching is largely determined by the balanced tension of both top and bobbin threads. The tension is well balanced when these two threads ‘lock’ in the middle of layers of the fabric you are sewing.

If, when you start to sew, you find that the stitching is irregular, you will need to adjust the tension control.

Make any adjustments with presser foot ‘down’.

A balanced tension (identical stitches both top and bottom) is usually only desireable for straight stitch sewing.

ZIG ZAG and DECORATIVE SEWING

For zigzag sewing and decorative stitch functions, thread ten- sion should be less than for straight stitch sewing.

You will always obtain a nicer stitch and less puckering when the upper thread appears on the bottom side of your fabric.

BOBBIN TENSION

The bobbin tension has been correctly set at the factory, so you do not need to adjust it.

CHANGING PRESSER FOOT

Be sure needle is in the up position. Raise presser foot lifter.

1.Push presser foot release button to remove the foot.

2.Place the desired foot on the needle plate aligning the presser foot pin with the foot holder.

3.Lower the presser foot lifter so that the foot holder snaps on the foot.

28

Under side

Côté de dessous

Reverso

Well balanced

Correct

Bien equilibrada

Top side

Côté de dessus

Cara

Top stitch too tight

Top stitch too loose

Fil supérieur trop tendu

Fil supérieur trop lâche

Puntada superior

Puntada superior

demasiado apretada

demasiado floja

Decrease tension

Increase tension

Diminuer la tension

Augmenter la tension

Disminuir tensión

Aumentar tensión

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Presser foot lifter

Levier de verrouillage du pied

Palanca pie prensatelas

 

3

 

1

 

Foot release button

 

Touche de verrouillage du pied

2

Boton de desprendimiento

prensatelas

Foot holder

 

Support du pied

 

Sujetador prensatelas

Page 30
Image 30
Singer 7466 instruction manual Adjusting TOP Thread Tension, Straight Stitching, Bobbin Tension, Changing Presser Foot