SPOOL PINS

HORIZONTAL SPOOL PIN for normal thread spool

Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. If the thread spool has a thread retaining slit, it should be placed to the right.

Select the correct spool pin cap according to the type and diameter of spool being used. The diameter of the spool pin cap should always be larger than that of the spool itself.

VERTICAL SPOOL PIN for large thread spool

Attach the spool pin and place a felt disc over it. Place a spool of thread on the spool pin.

PRESSER FOOT LIFTER

There are three positions for your presser foot.

1.Lower the presser foot to sew.

2.Raise the lifter to the middle position to insert or remove fabric.

3.Lift it to its highest position to change the presser foot or to remove thick fabric.

FEED DOG CONTROL

The feed dogs control the movement of the fabric that is being sewn. They should be raised for all general sewing purposes and lowered for darning, freehand embroidery and monogramming so that you, not the feed dogs, are guiding the fabric.

Spool

Bobine

Carrete

Spool pin felt discs

Rondelle feutre

Disco del pasador carrete

Vertical spool pin Porte-bobine vertical Pasador de carrete vertical

Thread retaining slot Fente de retenue de fil Ranura de retención de hilo

 

 

Spool pin

Spool pin cap

Spool

Porte-bobine

Pasador carrete

Couvre-fil

Bobine

 

Tapa del pasador carrete

 

Carrete

 

 

 

12

Page 14
Image 14
Singer 7466 instruction manual Spool Pins, Presser Foot Lifter, Feed DOG Control