SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle plate area before using your machine the first time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into the cord socket (1) and your wall outlet (2) as illustrated.
Connect the foot control plug (3) into the machine socket.
NOTE: W h e n f o o t c o n t r o l i s disconnected, the machine will not operate.
Set power/light switch at “OFF”
Mettez l’interrupteur moteur/ lumière sur “OFF”.
Poner el Interruptor de corriente/ luz de velocidad en “OFF”
Machine socket
Connecteur de la machine
Conector de la máquina
2
1 
Pin plug
Butée
Pasador
3
Power line cord
Cordon
Cordón de la linea eléctrica
Foot control
Rhéostat
Control por pedal
POWER/LIGHT SWITCH
Your machine will not operate until the power/ light switch is turned on. The same switch controls both the power and the light.
When servicing the machine, or changing needles, etc., machine must be disconnected from the power supply.
Always disconnect the machine from power supply by removing the plug from the
Power/light switch “OFF” | Power/light switch “ON” | ||
Interrupteur moteur/lumière “OFF” | Interrupteur moteur/lumière “ON” | ||
Interruptor corriente/luz “OFF” | Interruptor corriente/luz “ON” | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10
