Removing the Unit■ Removing the hard rubber frame

English

Insert the removal tool into the indentations in the hard rubber

frame, and pull it gently until the lock is released.

 

Accessory4

Removal tool

■ Removing the Unit

1 Make the faceplate control panel appear.

NOTE

When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove the unit.

2Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

3Remove the screw (M4⋅8) on the back panel.

4Insert the removal tool deeply, as illustrated, with the L on the left and the R on the right.

Screw (M4X8) (commercially available)

 

 

L

Accessory2

 

 

 

Removal tool

5

Push upward the both

 

 

 

tools, as shown, and pull

 

 

 

the unit toward you until it

 

 

 

is halfway out. The unit

 

 

 

may drop if you pull it out

 

L

 

completely.

 

 

6

Pull the unit all the way out

 

 

 

with your hands, being

 

 

 

careful not to drop it.

 

 

 

 

 

L

— 44 —