English
Troubleshooting Guide
The following messages are displayed when certain problems are occurring in your system. Take the recommended actions.
| EJECT | No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. |
| ] Load the disc magazine properly. |
| No CD in the unit. |
| ] Insert the CD. |
| NO DISC | No disc has been loaded in the disc magazine. |
| ] Load a disc into the disc magazine. |
No disc has been loaded in the disc magazine. | |
| ] Load a disc into the disc magazine. |
| The CD is very dirty. The CD is |
| ] Clean the CD and load it correctly. |
| BLANK | Nothing has been recorded on the MD. |
| NO TRACK | No tracks are recorded on the MD, although it has a title. |
| NO PANEL | The faceplate of the slave unit being connected to this unit has been removed. |
| ] Replace it. |
| The unit is malfunctioning for some reason. | |
| ] Press the reset button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre. |
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. | |
| ] Check the disc magazine. And then, press the reset button on the unit. |
| If the "E- 99" code does not disappear, consult your nearest service center. |
| HOLD | The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), |
| stopping all operation. |
]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc starts playing again.
•••The MD player section is not operating properly.] Reinsert the MD. If the MD cannot be ejected or the display continues to flash even when the MD has been properly | |
| reinserted, please switch off the power and consult your nearest service centre. |
•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
•Even though no device
— 48 —